Arduino MKR WAN 1300 (LoRa Connectivity)

Arduino MKR WAN 1300 (LoRa Connectivity) combines functionality of the MKR Zero and LoRa connectivity. The board is a cost effective solution for makers seeking to add Lo-Ra connectivity to IoT projects with minimal experience in networking. The MKR WAN 1300 is based on the Atmel SAMD21 and a Murata CMWX1ZZABZ Lo-Ra module. The board can be powered using two 1.5V "AA", "AAA" batteries, or external 5V. 

SPECIFICATIONS

• Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM

• Board Power Supply: (USB/VIN) 5V

• Supported Batteries: 2x AA or AAA

• Circuit Operating Voltage: 3.3V

• Digital I/O Pins: 8

• PWM Pins: 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)

• UART: 1

• SPI: 1

• I2C: 1

• Analog Input Pins: 7 (ADC 8/10/12 bit)

• Analog Output Pins: 1 (DAC 10 bit)

• External Interrupts: 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)

• DC Current per I/O Pin: 7 mA

• Flash Memory: 256 KB

• SRAM: 32 KB

• EEPROM: no

• Clock Speed: 32.768kHz (RTC), 48MHz

• LED_BUILTIN: 6

• Full-Speed USB Device and embedded Host

• Antenna power: 2dB

• Carrier frequency: 433/868/915MHz

• Working region: EU/US

• Length: 67.64mm

• Width: 25mm

• Weight: 32g