PA13EEA缓冲器放大器=原装=电子工程师分销商

发布时间: 2016/5/4 352 次浏览来源：

Image of Apex Microtechnology logo

PA13EEA Power Operational Amplifier

Apex Microtechnology’s PA13EEA is a high voltage and high output current operational amplifier designed to drive resistive, inductive, and capacitive loads

Image of Apex PA13EEA Power Operational Amplifier Apex Microtechnology’s PA13EEA is a 15 A, 90 V power operational amplifier with low thermal resistance (1.1°C/W). Target applications include driving resistive, inductive, and capacitive loads such as motors, magnetic deflection, transducers, and programmable power supplies. For optimum linearity, especially at low levels, the output stage is biased for Class A/B operation by using a thermistor compensated base emitter voltage multiplier circuit. The safe operating area (SOA) can be observed for all operating conditions by selection of user programmable current limit resistors, and the amplifier is internally compensated for all gain settings. The PA13 is not recommended for gains below –3 (inverting) or +4 (non-inverting). The PA13A is the A grade version providing enhance performance in the areas of offset voltage, offset current, and bias current. The PA13 series is a hybrid product design housed in an electrically isolated 12-pin PowerSIP package. For continuous operation under load, a heatsink of proper rating is recommended.

Features and Benefits		Applications
Low thermal resistance: 1.1°C/W Current fold-over protection Excellent linearity: class A/B output Wide supply range: ±10 V to ±45 V High output current: up to ±15 A peak		Motor, valve, and actuator control Magnetic deflection circuits up to 10 A Power transducers up to 100 kHz Temperature control up to 360 W Programmable power supplies up to 90 V Audio amplifiers up to 120 W RMS

PA13EEA Amplifier

	图片	制造商零件编号	描述	可供货数量
		PA13EEA	POWER AMP 15A 100V CLASSA/B 12SI	25 - 立即发货

上一篇：PA13EEA缓冲器放大器=原装=电子工程师分销商

下一篇：C4D10120D评估和演示板和套件原装=电子工程师分销商