Vishay VEMD5010X01 and VEMD5110X01光学传感器-光电二极管
VEMD5010X01 and VEMD5110X01 Silicon PIN Photodiodes with 7.5 mm2 Sensitive Area
Vishay offers the automotive-grade PIN photodiodes that deliver 7.5 mm2 sensitive area in low-profile packages
Image of Vishay Silicon PIN Photodiode Vishay’s AEC-Q101-qualified, surface-mount devices offer high reverse light current to 48 μA and low dark current of 2 nA. These devices are manufactured using Vishays foil assisted mold (FAM) technology. The photodiodes lead frame, bond wire, and connection pads are molded in a black epoxy, while a free cavity above the radiant sensitive area allows light to enter the package for signal generation. This design enables a smaller overall package size with a lower height profile, while maintaining a large radiant sensitive area. In addition, thermal stress on the bond is reduced for increased robustness and reliability.
The photodiodes are optimized for photo detection in applications such as rain, light, tunnel sensors, smoke detectors, wearable electronics, data transmission, and road cash systems. For the detection of visible and near infrared radiation, the VEMD5010X01s free cavity is filled with a clear epoxy for a wide sensitivity range from 430 nm to 1100 nm. For 790 nm to 1050 nm infrared applications, the VEMD5110X01 utilizes a black daylight filtering epoxy and is matched with 850 nm to 940 nm IR emitters.
The VEMD5010X01 and VEMD5110X01 feature fast response times, ±65° angles of half sensitivity, a wide temperature range of -40°C to +110°C, and 940 nm wavelengths of peak sensitivity. RoHS-compliant, halogen-free, and Vishay green, the photodiodes provide a moisture sensitivity level (MSL) of 4 in accordance with J-STD-020 for a floor life of 72 hours.
Features Application
Package type: surface mount
Package form: top view
Dimensions (L x W x H in mm): 5 x 4 x 0.9
Radiant sensitive area (in mm2): 7.5
AEC-Q101 qualified
High photo sensitivity
High radiant sensitivity
Suitable for visible and near infrared radiation
Fast response times
Angle of half sensitivity: ϕ = ±65°
Floor life: 72 h, MSL 4, according to J-STD-020
High speed photo detectors
High speed detectors for infrared radiation
Infrared remote controls and free air data transmission systems, such as road cash systems
Photodiodes for smoke detectors
Photodiodes for rain sensors
